KNJN.com - electronic development products You are in KNJN US - Shipping worldwide from CA, USA.

For KNJN EU, click here.
KNJN US
Welcome!
Shopping information

Development boards
Boards documentations

FPGA
Saxo & Xylo (USB-2)
Plutos (RS-232)
Pluto-P (Parallel)
Dragon (PCI)

Peripheral
Flashy
TXDI
I2C

Shop
Boards USB-2
Boards RS-232
Boards Parallel
Boards PCI

Flashy
Flashy - Accessories
Oscilloscope probes

LCD - Graphic
LCD - Text
Opto - Displays

I2C - Accessories
I2C - Displays
I2C - PLLs
I2C - Master

Adapter boards (TXDI)
Adapter boards (misc)

JTAG cable - FPGA
JTAG cable - ARM

Cables - Custom
Cables - Probing
Cables - IDC
Cables - Extension
Cables - USB
Cables - Power

Electronic components
Electronic connectors

Software

Shop - LCD - Graphic


Graphic LCDs (with adapters)

These LCDs come with an adapter board that simplifies the connection to FPGA boards:

  • KNJN FPGA boards: connect directly with the provided cable(s).
  • Other FPGA boards: these LCDs use only two 3.3V IO pins from the FPGA, plus 5V power and ground (4 wires total), so are easy to interface with any FPGA board.

An HDL reference design is provided (for Xilinx's ISE and Altera's Quartus-II).

Graphic color LCD panel
  • Color display, 320x240 pixels, with CCFL backlight
  • Cable/connector/adapter/CCFL inverter included.
Graphic monochrome LCD panel
  • Monochrome display, 480x320 pixels, no backlight
  • Cable/connector/adapter included.
Graphic LCDs (0.1" header)

These two LCDs are provided with the datasheet, but no adapter board, so that you connect them to an FPGA board yourself.

Epson LCD module

Note: Shipping to the USA only.

Graphic LCDs (flat cable)

These two smaller LCDs are provided without datasheet, but have a similar interface on a flat cable.

Epson LCD module

Note: Shipping to the USA only.



<<< PREVIOUS: Shop - Oscilloscope probes <<<

>>> NEXT: Shop - LCD - Text >>>